A pocket-sized, floral-inspired mechanical fidget toy that doubles as a keychain. It features a smooth-rotating outer petal gear that spins around a central core for a satisfying, tactile desk experience.
📦 What’s Included
Flower Core Shaft.stl (The main central post with integrated keychain loop)
Rotating Petal Wheel.stl (The outer gear ring with a stylized floral silhouette)
Retaining Cap Ring.stl (The front-locking washer that keeps the wheel secured)
🛠️ Recommended Print Settings
Printer Type: FDM
Filament: PLA or PETG
Layer Height: 0.12mm or 0.16mm (recommended for a butter-smooth spin)
Walls/Perimeters: 3 minimum
Infill: 15% – 20%
Supports: No.
⚠️ Notes & License
Digital Download: STL files only. No physical product or keychain hardware included.
License: Personal Use Only. Commercial distribution or reselling of the file/print is prohibited.
📦 What’s Included
Main Holder Bracket.stl (Toothbrush caddy with integrated threaded sleeve)
Knurled Screw Cap.stl (Threaded end-cap for the enclosed storage tube)
🛠️ Recommended Print Settings
Printer Type: FDM
Filament: PETG recommended (PETG provides excellent water resistance, is easy to sanitize, and offers smooth mechanical thread action over standard PLA).
Layer Height: 0.16mm or 0.20mm (0.16mm is ideal for the clean execution of the screw threads and knurled texture).
Walls/Perimeters: 3 minimum.
Infill: 15% – 20% (Gyroid).
Supports: No. Geometries and internal spans are optimized to print cleanly without support material.
⚠️ Notes & License
Digital Download: STL files only. No physical product will be shipped.
Hygienic Tip: If using in a wet environment, printing with 100% solid walls or applying a food-safe clear coat helps seal layer lines for effortless cleaning.
License: Personal Use Only. Commercial distribution or reselling of the file/print is prohibited.
📦 What’s Included
Cage Main Frame.stl (Rigid base structure with dual hand grips)
Sliding Clamp_Bracket.stl (Adjustable retention arm)
Threaded Locking Knobs.stl (Ergonomic thumb screws for secure clamping)
🛠️ Recommended Print Settings
Printer Type: FDM
Filament: PLA or PETG (PETG recommended for enhanced impact resistance and outdoor durability).
Layer Height: 0.16mm or 0.20mm (0.16mm ensures smooth mechanical action on the sliding tracks and tight thread engagement).
Walls/Perimeters: 4 minimum (essential for structural rigidity and knob thread durability).
Infill: 25% – 30% (Gyroid or Grid for uniform strength across the frame).
Supports: Minimal supports may be required depending on your printer's bridging capability for the recessed sliding tracks.
⚠️ Notes & License
Capacity Dimensions: Universally adjustable up to 3.8" width x 6.0" length.
Digital Download: STL files only. No physical product or external metal hardware required—100% 3D printable mechanical assembly.
License: Personal Use Only. Commercial distribution or reselling of the file/print is prohibited.
📦 What’s Included
Stand Side Left.stl & Stand_Side_Right.stl (A-frame supports)
Threaded Adjustment_Bolt.stl
Thumb Nuts Wheels.stl & Locking Knob.stl (For toolless width adjustment)
🛠️ Recommended Print Settings
Printer Type: FDM
Filament: PETG recommended for structural strength and durable, smooth-gliding threads (PLA acceptable).
Layer Height: 0.16mm or 0.20mm (lower layer heights ensure crisp, functional thread engagement).
Walls/Perimeters: 4 minimum (critical for the mechanical integrity of the bolt and tension points).
Infill: 25% – 30% Gyroid.
Supports: No. Geometries are optimized for printability without support material.
⚠️ Notes & License
Digital Download: STL files only. No physical product or metal hardware required—this is a 100% 3D-printable mechanical assembly.
License: Personal Use Only. Commercial distribution or reselling of the file/print is prohibited.
📦 What’s Included
Sleeve Body STL
🛠️ Recommended Print Settings
Printer Type: FDM
Filament: PETG (Recommended for impact resistance and flex)
Layer Height: 0.16mm (for smooth interior walls)
Walls/Perimeters: 3 minimum
Infill: 15% - 20%
Supports: None. Designed to print clean without them.
⚠️ Notes & License
Compatibility: Fits Apple AirPods 1st Generation charging cases only.
Digital Download: STL files only. No physical product will be shipped.
License: Personal Use Only. Commercial distribution or reselling of the file/print is prohibited.
📦 What’s Included
Sony LinkBud S Case (Single-piece slip-on design) STL
🛠️ Recommended Print Settings
Printer Type: FDM
Filament: TPU (Flexible filament is required for the slip-on fit and shock absorption)
Layer Height: 0.20mm
Walls/Perimeters: 3 minimum (for durability around the lanyard loop)
Infill: 100% (recommended for thin-walled flexible cases to maximize protection)
Supports: No. Designed with optimized angles to print cleanly without supports.
⚠️ Notes & License
Compatibility: Fits Sony LinkBuds S charging cases only.
Digital Download: STL files only. No physical product will be shipped.
License: Personal Use Only. Commercial distribution or reselling of the file/print is prohibited.
No results match your search. Try removing a few filters.
